ICP2432 Controller Simpact's ICP2432 is a programmable serial data communications processor that links legacy and specialty protocol networks to PCI-based computers. The ICP2432 functions as a front end processor for real-time, mission-critical applications and off-loads high-speed data communications tasks which otherwise consume host processor capacity. The programmability and flexibility of the ICP2432 ensures that it can adapt as connectivity requirements change with the addition of protocols, clients, or devices. The Logical Company has purchased the rights to manufacture and sell the ICP2432 controllers. We offer controllers for existing and operating applications using the ICP2432. It is important that applications have the required driver and be able to port it to a new system. Logical does not supply software drivers or support new applications using the ICP2432.     Application Environment Host Operating Systems Windows NT, Solaris, Tru64 UNIX (Digital UNIX), VMS Programming Support Protocol Toolkit for rapid development of custom protocols. Not available from Logical. Protocol Support Wide variety of protocols including SNA, X.25, bisync, async, SCADA, and many more. Not available from Logical. Hardware Processor Motorola-based CPU Memory 8MB DRAM Serial Ports 2, 4, or 8 full duplex, DMA-supported ports; Z16C32 serial communications controllers; data rate of each port software selectable; transmit clock source software selectable for synchronous communication; mandatory and optional modem control signals provided Electrical Interfaces EIA-232*, EIA-449 (422), EIA 530, MIL-STD-188-114A, V.11 (ISO-4903), V.21 bis, V.35/Bell 306 Mechanical Interfaces 2 port: 2 micro-D 26 pin sockets. Micro-D to DB25-p or DB37-p cables available. 4 port: 1 high density 100 pin socket. High density 100 pin to 4 DB25-p or DB37-p cable available. 8 port: 1 high density 100 pin socket. High density 100 pin to 8 DB25-p cable available. Power Requirements 2-port board: +5Vdc, 1.5A typical 4-port board: +5Vdc, 1.75A typical 8-port board: +5Vdc, 2.0A typical Physical PCI 3/4 card form factor Environmental Temperature: 0° to 50° C, operating; -40° to 65° C, non-operating Humidity: 10% to 90% R.H., non-condensing Altitude: 0 to 10,000 feet Certifications FCC, CE